Troubleshooting; Possible Causes; Please Do Not Return This Product To The Store - Bissell PowerForce® Helix™ Turbo Bagless User Manual

T
roubleshooting
WARNING:
!
To reduce the risk of electric shock, turn power OFF and
disconnect polarized plug from electrical outlet before performing
maintenance or troubleshooting.
Vacuum cleaner won't turn on...

Possible causes

Power cord not plugged in
Blown fuse/tripped breaker in home
Thermal protector activated
Vacuum cleaner doesn't have good suction...
Possible causes
Hose not properly positioned
Dirt tank not installed properly
Dirt tank is full
Clog in cleaner
Filters are dirty
Hose not properly attached
Vacuum is not suctioning or blowing
Other maintenance or service not included in the manual
should be performed by an authorized service representative.
Thank you for selecting a BISSELL brand
If you should happen to need assistance during assembly
or operation, call BISSELL Consumer Service at 1-800-237-7691.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
Remedies
Check electrical plug
Check/replace fuse or reset breaker
Allow cleaner to cool for 30 minutes, see
pg. 8. This will reset thermal protector
Remedies
Make sure hose is fully connected to base
and body. Be sure to hold onto plastic hose
collar while connecting hose.
Check assembly of upper and lower portions,
correctly position and secure into place
Empty dirt tank
Follow instructions on pg. 11 and 12 for
clearing clogs
Check and clean filter
Make sure hose collar is properly installed
Make sure hose collar is properly installed
product.
13