Saving Settings To Usb Flash Memory; Loading The Settings From A Usb Flash Memory - Yamaha MX49 Owner's Manual

Quick Guide
Saving settings to USB flash
memory
You can save all data of the User memory—containing
Performances, created User Voices, and Utility settings—
to USB flash memory as an "All" file (extension: .X5A).
1
Connect a USB flash memory to the USB [TO
DEVICE] terminal.
2
Press [FILE].
3
Press the Cursor [ ] buttons several times to
select "01:Save," then press [ENTER].
FILE
a01:Save
4
Assign a name to the file.
For instructions on entering a name, see "Naming"
(page 17) in "Basic Operations and Displays."
FILE*Save
*****Name=[********]
5
Press [ENTER].
6
Press [INC/YES].
The file is saved to the USB flash memory. To cancel
the Save operation, press [EXIT] while the "Now
saving..." message is still displayed.
**Are*you*sure?***
q
e****[NO]/[YES]****
7
Press [EXIT] several times to exit from the
File display.
36
MX49/MX61 Owner's Manual
Loading the settings from a USB
flash memory
1
Connect the USB flash memory to the USB
[TO DEVICE] terminal.
2
Press [FILE].
3
Use the Cursor [ ]/[ ] buttons to select
"02:Load," then press [ENTER].
Any "All" files that are contained in the USB flash
memory appear in the display.
NOTE
If no "All" files are stored in the root directory of the USB
flash memory, a "File not found" message appears and
the Load display cannot be called up.
2
FILE
d02:Load
4
Select the desired file, then press [ENTER].
FILE*Load
2
*******File=MX01
5
Select the desired data type of the selected
"All" file, then press [ENTER].
Select the desired type: all data (All), all data except
for the Utility settings (All without Sys), or
Performance data only (Performance).
FILE*Load
w
Type=****Performance
r
2
2
2