Connecting An External Midi Instrument; Controlling The Mx49/Mx61 From An External Midi Keyboard Or Synthesizer - Yamaha MX49 Owner's Manual

6
If you've set "Type" to "Performance" in step
5, select the desired Performance number,
then press [ENTER].
If you've set "Type" to something other than
"Performance" in step 5, go on to step 8.
Src*Performance
001(A01):MXCategory
7
Select the destination Performance number
(for loading), then press [ENTER].
Dst*Performance
003(A03):Sirius
8
Press [INC/YES].
The data is loaded from the USB flash memory. To
cancel the Load operation, press [EXIT] while the
"Now loading..." message is still displayed.
q **Are*you*sure?***
e****[NO]/[YES]****
9
Press [EXIT] repeatedly if necessary to exit
from the File display.
Connecting an external
MIDI instrument
With a standard MIDI cable (available separately), you
can connect an external MIDI instrument, and transmit
MIDI data between the MX49/MX61 and the connected
2 instrument.
Either the MIDI connectors or the USB [TO HOST]
terminal can be used for MIDI data transmission/
reception; however, they cannot be used at the same
time. Select the desired connector for use in the "MIDI IN/
OUT" parameter of the [UTILITY]  "02:MIDI" display. As
you work through the explanations in this chapter, set
"MIDI IN/OUT" to "MIDI" since MIDI is used as the
example connection here.
2
Controlling the MX49/MX61 from
an external MIDI keyboard or
synthesizer
Here, we'll use an external keyboard or synthesizer to
remotely select and play the Voices of the MX49/MX61.
w
r
External MIDI keyboard (for example, an 88-key synthesizer)
MIDI [IN]
MX49/MX61
MIDI OUT
MX49/MX61 Owner's Manual
Quick Guide
37