Changing The Rhythm Pattern Type And Sound; Changing The Tempo For The Rhythm Pattern - Yamaha MX49 Owner's Manual

Quick Guide
NOTE
If you wish to cancel this standby status, press
[ ] (Stop).
2
Play the keyboard.
The Rhythm Pattern starts at the same time.
3
Press [ ] (Stop) to stop the Rhythm
Pattern.
Changing the Rhythm Pattern type
and sound
You can select a different Rhythm Pattern to be assigned
to the Performance, and even change the Drum Voice
used for the Pattern.
1
Press [RHYTHM PATTERN].
2
Press the Cursor [ ] button repeatedly if
necessary to call up the 1st page (similar to
the one shown below), then press [ / ]
(Play/Pause) and change the Rhythm Pattern
type.
Move the cursor to the category or number of the
Rhythm Pattern with the Cursor [ ]/[ ] buttons.
PATTERN*****01:01/04
a *R&B:091:Smooth*2
Category
3
Press the Cursor [ ] button to call up the 2nd
page, then rotate the [DATA] dial to change
the Drum Voice.
PATTERN*****01:01/04
d *DR*:073:Hard*Kit
NOTE
You can set additional parameters related to the Rhythm
Pattern in other pages. For details about these
parameters, see the "Reference Manual" PDF
document.
4
When you have finished making the desired
Rhythm Pattern settings, press [ ] (Stop) to
stop the Rhythm Pattern.
26
MX49/MX61 Owner's Manual
+
Number Name
Changing the tempo for the
Rhythm Pattern
1
Press [TEMPO].
2
Press [ / ] (Play/Pause) to play back the
Rhythm Pattern, then rotate the [DATA] dial to
change the tempo.
*******Tempo q
**********90
e v
NOTE
This tempo setting is automatically reflected to the
Arpeggio tempo and can be set for each Performance.
Tap Tempo function
The tempo can also set by "playing" or tapping the
[TEMPO] button several times repeatedly at the
desired tempo.
Storing the Rhythm Pattern
You can store the changed Rhythm Pattern settings
as Performance data. For instructions on storing a
Performance, see page 33.
w
r