Drum Assign-Layering A Drum Part With The Current Voice; Changing The Drum Pattern (Arpeggio Type) - Yamaha S70XS Owner's Manual

Creating a New Performance by Using Your Favorite Voice (Performance Creator)
Drum Assign—Layering a
drum Part with the current
Voice
This section explains how to create a Performance in
which you can trigger a drum pattern (via the Arpeggio
function) in addition to the current Voice.
1
Select a Voice in the Voice mode.
2
Press the [DRUM ASSIGN] button on the front
panel.
The Drum Assign display appears. The Dr/Pc (Drum/
Percussion) is automatically assigned to the Category. The
Drum Voice is assigned to Part 4 then the Arpeggio is
automatically turned on. Play the keyboard to trigger the
Arpeggio.
3
Press the Cursor [R] button.
The Voice list is shown.
4
Select the desired Drum Voice from the list,
then press the [ENTER] button.
The Performance Play display will appear.
30
S90 XS/S70 XS Owner's Manual
Changing the drum pattern
(Arpeggio Type)
Executing the Drum Assign function will assign the Drum
Voice to Part 4 and set the Arpeggio of Part 4 to on. If you
want to change the drum pattern, select a different
Arpeggio Type in the Performance Part Edit.
5
Press the [EDIT] button in the Performance
Play display.
The Performance Edit Select display appears.
6
Select Part 4 by using the cursor buttons
then press the [ENTER] button.
7
Select "Arpeggio" by using the cursor
buttons then press the [ENTER] button.
8
Select "Arp 1 Type" by using the cursor
buttons then press the [ENTER] button.