Making Global System Settings (Utility Mode); Setting The Default Mode When Turning The Power On; Reversing The Lcd Status; Click (Metronome) Settings - Yamaha MOX6 Owner's Manual

Quick Guide
Making Global System
Settings (Utility Mode)
In the Utility mode, you can set parameters that apply to the
entire system of this instrument. To enter the Utility mode,
press the [UTILITY] button. Pressing the [EXIT] button returns
to the original display.
This section describes some useful functions in the Utility
mode.
Setting the default mode when
turning the power on
[F1] GENERAL  [SF6] OTHER  Cursor [<] button 
"PowerOnMode"
From the Voice, Performance, or Master, the mode specified
here is called up when turning the power on.

Reversing the LCD status

[F1] GENERAL  [SF6] OTHER  Cursor [<] button 
"LCD Mode"
This parameter determines the LCD status.
When "normal" is selected:
When "reverse" is selected:
You can use the Master mode to memorize the settings you
use most often.
56
MOX6/MOX8 Owner's Manual

Click (metronome) settings

[F2] SEQ  [SF1] CLICK
Determines the tempo, volume and output destination of the
click (metronome).
Effect settings applied to the signal
input from the A/D INPUT jack
[F3] VCE A/D
Determines the settings for the effects applied to the
incoming audio signal from the A/D INPUT [L]/[R] jacks in
the Voice mode.
Master Effect/Master EQ settings
in the Voice mode
[F2] VOICE  [SF1] MFX, [SF2] MEQ
Determines how much of the Effect and EQ processing is
applied to the master output.