Remote-Controlling The Software From The Mox6/Mox8 (Remote Mode); Remote-Controlling The Daw (Remote Mode) - Yamaha MOX6 Owner's Manual

2
Select the Song or Pattern to be edited.
3
Press the [MIXING] button to call up the Mixing
display.
4
Set up the Mixing for parts 1 – 16 as necessary.
From the Mixing display, you can select Voices and set
various parameters such as pan, volume, balance between
the Chorus/Reverb and dry sound, Insertion effect on/off and
Arpeggio on/off.
Setting up the DAW software on the computer
1
Set the MIDI output port of the Tracks for playing
the MOX6/MOX8 to Port 1 of the "MOX6/MOX8"
2
Enter the MIDI data to each Track of the DAW
software on the computer.
The tone generator settings of the part corresponding to the
MIDI Track will be set in the Mixing mode on the MOX6/
MOX8.
NOTE
When using Cubase as the DAW, you can create an original
Mixing setup of the MOX6/MOX8 from the MOX6/MOX8
Editor on your computer. The created Mixing setup can be
saved as a Cubase Project file for future recall.
Remote-controlling the software
from the MOX6/MOX8 (Remote
mode)
The MOX6/MOX8 features a highly convenient Remote mode
which lets you control the DAW software and software
synthesizer on your computer via the panel operations of the
MOX6/MOX8. For example, you can start/stop playback of
the DAW software on the computer by using the Function
buttons and control the song position on the DAW software
by using the [DATA] dial, [INC] and [DEC] buttons instead of
using the mouse or computer keyboard.
Remote-controlling the software synthesizer
Up to 50 Control Templates of VST Instruments can be stored
to internal memory of this instrument. With these, you can use
the MOX6/MOX8 to control various software synthesizers.
Use the MOX6/MOX8 Remote Editor for editing the Control
Template.
NOTE
To use the MOX6/MOX8 Remote Editor, you need to install the
MOX6/MOX8 Remote Tools. The MOX6/MOX8 Remote Tools
consists of two components: MOX6/MOX8 Remote Editor and
MOX6/MOX8 Extension, which enables you to use the MOX6/
MOX8 along with Cubase series 5.
MOX6/MOX8 Remote Tools can be downloaded from the
following Yamaha web site. For details on operating the MOX6/
MOX8 Remote Editor, see the PDF manual supplied with the
MOX6/MOX8 Remote Editor.
http://www.yamahasynth.com/download/
Remote-controlling the DAW software
The DAW applications Cubase, Logic Pro, SONAR and Digital
Performer can be controlled via the Remote Control mode of
the MOX6/MOX8.
For the most recent information on DAW software that can be
controlled from the MOX6/MOX8, see the following URL:
http://www.yamahasynth.com/
Before you can use the Remote Control function, you'll need
to follow the setup instructions below.
NOTE
Before making the setup of DAW Remote, make sure to properly
install the Yamaha Steinberg USB Driver and the MOX6/MOX8
Remote Tools.
Setting up the MOX6/MOX8
1
Connect this instrument to the computer via a USB
cable (page 50).
2
Press the [DAW REMOTE] button to enter the
Remote mode.
3
Press the [UTILITY] button to call up the REMOTE
display of the Utility mode. Then set the "DAW
Select" to the desired DAW software.
4
Press the [STORE] button to store the settings to
internal memory.
5
Start the DAW software on the connected
computer.
Setting up the DAW software on the computer
This section explains how to set up after starting each
application.
NOTE
When the cable between the MOX6/MOX8 and the Windows
computer is disconnected or the MOX6/MOX8 is turned off
accidentally, the DAW will not recognize the MOX6/MOX8 again
even if you connect the cable again or turn the MOX6/MOX8 on.
If this occurs, exit the DAW software, then restart it after setting
up the MOX6/MOX8 and making sure the connection is secure.
Quick Guide
MOX6/MOX8 Owner's Manual
53