Yamaha MOX6 Owner's Manual page 15

edit the parameters commonly applied to all Elements, Parts
or Zones in the following modes: Voice Edit, Performance,
Song/Pattern Mixing Edit, Mixing Voice Edit and Master Edit.
[PATTERN SECTION/PERFORMANCE
CONTROL] button
This button is available only in the Performance mode and
Pattern mode. In the Performance mode, turning on this button
will assign the following functions to the Number [1] – [16]
buttons.
Number button
[1] – [4] Selecting Performance Parts 1 – 4.
[5] – [8] Setting the Arpeggio Switch to on/off for
Performance Parts 1 – 4.
[9] – [12] Setting the mute status for Performance Parts 1 – 4.
[13] – [16] Setting the Arpeggio Hold for Performance Parts 1 – 4.
In the Pattern mode, turning on this button will assign
Sections A – H to the Number [1] – [16] buttons.
Number [1] – [16] buttons
Use of these buttons differs depending on the on/off status of the [PATTERN SECTION/PERFORMANCE CONTROL], [TRACK],
[MUTE] and [SOLO] buttons.
Functions of the Number [1] – [16] buttons
Mode When the [PATTERN SECTION/
PERFORMANCE CONTROL]
button is turned on:
Voice Play –
Normal Voice –
Edit
Drum Voice –
Edit
Performance Performance Control ( )
Play
Performance Performance Control ( )
Edit
Master Play –
Master Edit –
Song/Pattern Section selection in the
Play Pattern mode
Song/Pattern Section selection in the
Mixing Pattern mode
Mixing Voice –
Edit
Function
When the [TRACK] button
is turned on:
Keyboard transmit channel
setting
Changes the Edit mode from
Common Edit to Element Edit
and Element selection ([1] –[8]).
Changes the Edit mode from
Common Edit to Drum Key Edit
Keyboard transmit channel
setting
Performance Part selection
([1] – [4])
Keyboard transmit channel setting
(when memorizing the Voice mode
or Performance mode to the
current Master) or Song/Pattern
Track selection (when memorizing
the Song mode or Pattern mode to
the current Master)
Changes the Edit mode from
Common Edit to Zone Edit and
Zone selection ([1] – [8])
Song/Pattern Track selection
Song/Pattern Part selection
Element selection ([1] – [8])
[TRACK] button
Turning this button on in the Song/Pattern mode enables the
Number [1] – [16] buttons for selecting corresponding Song/
Pattern Tracks.
[MUTE] button (page 38)
Turning this button on in Normal Voice Edit and Mixing Voice
Edit enables the Number [1] – [8] buttons for muting Voice
Elements (1 – 8). Turning this button on in the other modes
enables the Number [1] – [16] buttons for muting
Performance Parts (1 – 4), Song Tracks/Parts (1 – 16), and
Pattern Tracks/Parts (1 – 16).
[SOLO] button (page 38)
Turning this button on in Normal Voice Edit and Mixing Voice
Edit enables the Number [1] – [8] buttons for soloing a Voice
Element (1 – 8). Turning this button on in the other modes
enables the Number [1] – [16] buttons for soloing a
Performance Part (1 – 4), a Song Track/Part (1 – 16), and a
Pattern Track/Part (1 – 16).
NOTE
The on/off status of buttons
buttons in different ways, depending on the currently selected
mode. Refer to the table below.
When the [MUTE] When the [SOLO]
button is turned on: button is turned
–
Element Mute setting Solo Element
([9] – [16]) selection ([9] – [16])
–
Part Mute setting Solo Part selection
([1] – [4]) ([1] – [4])
Part Mute setting Solo Part selection
([1] – [4]) ([1] – [4])
–
–
Song/Pattern Track Solo Track selection Song/Pattern
Mute setting
Song/Pattern Part Mute Solo Part selection
setting
Element Mute setting Solo Element
([9] – [16]) selection ([9] – [16])
Control and Functions
– affects the Number [1] – [16]
When all the
buttons are
on: turned off:
– Voice selection
–
– –
Performance
selection
–
– Master program
selection
– –
selection
Voice selection of
the current Part
–
MOX6/MOX8 Owner's Manual
15