Installing P-Touch Editor - Brother PT 2300 - P-Touch 2300 Thermal Transfer Printer User Manual

The P-touch Editor software adds even more illustration and layout features to the label-mak-
ing possibilities available with your PT-2300/2310.

Do not connect the PT-2300/2310 to the computer before installing the P-touch Editor
software, otherwise it may not be installed correctly. Be sure not to connect the PT-
2300/2310 until you are instructed to do so.
On an IBM PC-Compatible Computer
To Install the P-touch Editor Software:
1 Check that your system configuration meets the following requirements.
Computer: IBM PC or compatible
Operating system: Pre-installed with Microsoft
sional or XP
Hard disk free space: At least 20 MB

A few hundred megabytes of additional free space may be needed when printing
long labels or large amounts of data.

For installation on Windows
In addition, printing requires power user or administrator privileges.
This software cannot be operated in Users groups.
This software is not compatible with the Windows

With Windows
administrator privileges. These operations cannot be performed from an account
with limited privileges.
Available memory: Minimum 32 MB
Monitor: VGA or higher graphics card
USB port
CD-ROM drive
2 Insert the P-touch Editor Version 3.1 CD-
ROM into the computer's CD-ROM drive. A
dialog box automatically appears, allowing
you to select what to install.

If the dialog box does not automatically
appear, double-click "My Computer" on
the desktop, and then double-click the
CD-ROM drive containing the CD-ROM.
(For Windows
the Start menu, and then double-click the
CD-ROM drive containing the CD-ROM.)
Next, double-click "Setup.exe" to
display the dialog box.

INSTALLING P-TOUCH EDITOR

®
XP, printing and installation is only possible from an account with
®
XP, click "My Computer" in
®
Windows
®
2000, administrator privileges are required.
®
98, 98SE, Me, 2000 Profes-
®
2000 Server operating system.
7