Installing P-Touch Editor Only - Brother P-touch 9500PC Quick Reference

Installing P-touch Editor
only
Install P-touch Editor 4.0 to design labels.
1 Start the personal computer, and then
insert the CD-ROM into the CD-ROM
drive.
→The Brother Setup dialog box
appears.
• It may take a short time until the
Brother Setup dialog box appears.
• If the Brother Setup dialog box does not
appear, double-click the My Computer
icon, and then double-click the P-touch
icon.
Select the desired language, and then
2
click [OK].
Click the button for Advanced setup.
3
→The dialog box to select the software
to install appears.
Click the button for P-touch Editor.
4
32
Follow the instructions on each dialog
5
box and start installation.
5
Refer to steps
basic setup" (→ P.27).
→ The User Registration dialog box
appears.
Select "Yes, display the page.", and then
6
click [Next].
→ The InstallShield Wizard Complete
dialog box appears.
Click [Finish].
7
→ P-touch Editor will be installed and
the dialog box in step
again.
When installing the printer driver as well,
proceed to step
printer driver only" (→ P.36).
a
- in "Installing using
3
appears
4
in "Installing the