Installing P-Touch Editor; Printer Driver Installation (For Windows® 95/98/Nt 4.0/2000); For A Serial Connection; With Windows® 95/Nt 4.0 - Brother PT-9200DX QUICK REFERENCE Quick Reference

Before labels can be printed on the PT-9200DX, the P-touch Editor software and the PT-9200DX printer driver must be
installed.
On an IBM PC-compatible computer:
Check that your system configuration meets the following requirements.
Computer: IBM PC or compatible
Operating system:
Serial interface: PC equipped with an x86 processor and a serial (RS-232C) port, and running Microsoft
Windows
USB interface: PC equipped with a USB port and running Microsoft
Microsoft
. Some PC's with Microsoft
Hard disk free space: At least 20 MB
. A few hundred megabytes of additional free space may be needed when printing long labels or large amounts of
data.
Monitor: VGA or higher graphics card
Port: Serial or USB
Available memory: Minimum 32 MB
CD-ROM drive
Printer Driver Installation
(for Windows® 95/98/NT 4.0/2000)

• For a serial connection:

With Windows® 95/NT 4.0:
The software and printer driver installation should be per-
formed in the following order:
(1) P-touch Editor Version 3.1
(2) Printer driver
1 Insert the P-touch Editor CD-ROM into the computer's
CD-ROM drive. A dialog box that allows you to select
what to install automatically appears.
If the dialog box does not automatically appear,
double-click "My Computer" on the desktop, double-
click the icon for the CD-ROM drive containing the
CD-ROM, and then double-click "Ptsetup.exe" to
display the dialog box.
4

Installing P-touch Editor

® 95/98/2000 or Windows ®
® ®
Windows 98
® Windows ® 95 pre-installed do not support all USB hardware features.
NT 4.0
® Windows ®
2 To install both P-touch Editor Version 3.1 and the serial
printer driver for the PT-9200DX, click the top button
(P-touch Editor).
To install just the serial printer driver for the PT-
9200DX, click the bottom button (Printer driver). (If just
the printer driver is to be installed, continue with the
installation from step 5.)
(1) P-touch Editor Version 3.1 installation
3 Install P-touch Editor Version 3.1 according to the
procedure described in P-touch Editor Version 3.1
Installation on pages 20 through 21.
4 After installation of P-touch Editor Version 3.1 is
finished, install the printer driver as described below.
(2) Printer driver installation
5 A Driver Setup dialog box that allows you to select
whether to install or uninstall the printer driver
appears. Check that "Brother PT-9200DX" is selected
for installation, select "Install", and then click the Next
button.
2000, or pre-installed with