Groove Tracker Control Pad(S); Groove Tracker Advance Step - Yamaha DTX400K Owner's Manual

6-5. Groove Tracker Control Pad(s)

Steps:
MENU ([KIT] + [SONG])  [6]  [5]  Setting
Using the following procedure, you can select which pad(s)
you would like to use to advance the practice drum pattern
in Groove Tracker training (page 36).
1.
While holding the [KIT] button, press the [SONG] but-
ton to activate Menu Mode.
2.
Press number button [6] to select the Training Settings
parameter group.
3.
Press number button [5] to select the Groove Tracker
Control Pad(s) parameter.
4.
Select a new setting using the corresponding number
button ([1] to [5]). The available settings are as follows.
Number
Setting
button
[1] Auto
Cymbal
[2] +
hi-hat 1
Cymbal
[3] +
hi-hat 2
[4] Kick
Snare
[5] +
hi-hat
[6] All
NOTE
• With a setting of [3] to [6], the corresponding pad(s) will not pro-
duce a drum sound of their own.
• When this parameter is set to [6], the [DRUM MUTE] button can-
not be used to mute the practice drum pattern.
Setting
Description
The drum module will automati-
cally select the best setting for
the practice drum pattern.
The cymbal and hi-hat pads will
advance the pattern and will
also produce their own sounds.
The cymbal and hi-hat pads will
advance the pattern.
The kick pad or pedal will
advance the pattern.
The snare and hi-hat pads will
advance the pattern.
All pads and pedals will advance
the pattern.
Setting Parameters using Menu Mode

6-6. Groove Tracker Advance Step

Steps:
MENU ([KIT] + [SONG])  [6]  [6]  Setting
Using the following procedure, you can set how much the
practice drum pattern in Groove Tracker training (page 36)
should advance for each strike of the set pad(s).
1.
While holding the [KIT] button, press the [SONG] but-
ton to activate Menu Mode.
2.
Press number button [6] to select the Training Settings
parameter group.
3.
Press number button [6] to select the Groove Tracker
Advance Step parameter.
4.
Select a new advancement step using the corresponding
number button ([1] to [4]). The available settings are as
follows.
Number
Setting
button
[1] Auto
[2]
[3]
[4]
3
[5]
NOTE
• The advancement step set using this parameter only applies to
Groove Tracker training. Other types of training are not affected.
• If, when set to [1], you press and hold number button [1], the
drum module will flash a number button between [2] and [5] to
indicate the result of automatic identification.
DTX400K/DTX430K/DTX450K
Setting
Description
The drum module will automati-
cally identify the best advance-
ment step for the practice drum
pattern.
The practice drum pattern will
advance in quarter-note steps.
The practice drum pattern will
advance in eighth-note steps.
The practice drum pattern will
advance in sixteenth-note
steps.
The practice drum pattern will
advance in eighth-note triplet
steps.
Owner's Manual
51