Yamaha DTX400K Owner's Manual page 15

The details of
For DTX400K and DTX430K Owners
Step 8
Attaching the hi-hat
holder
!1
Joint

1.
Loosen the two key bolts on the joint on the snare-
pad part, which was attached in
2.
Take the hi-hat holder (!1 ) from the package and slide it
into the joint from the front as shown in the figure. Then
adjust the angle of the hi-hat holder.
•
When correctly inserted, the tip of the hi-hat holder
(!1 ) will protrude slightly from the rear of the joint.
•
When correctly oriented, the metal rod section at the
top of the hi-hat holder (!1 ) will be vertical.

3.
Tighten the two key bolts to secure the hi-hat holder
(!1 ) in place.
Step 9
Attaching the cymbal holders
!0
Step 8 are different for the DTX400K, DTX430K, and DTX450K.
Snare pad
Step 7
.
!0
For DTX450K Owners
Step 8
Attaching the hi-hat
holder
!1
Joint

1.
Loosen the two key bolts on the joint on the left arm,
Step 4
which was attached in
2.
Take the hi-hat holder (!1 ) from the package and slide it
into the joint from the rear as shown in the figure. Then
adjust the angle of the hi-hat holder.
•
When correctly inserted, the tip of the hi-hat holder
(!1 ) will protrude slightly from the front of the joint.
•
When correctly oriented, the metal rod section at the
top of the hi-hat holder (!1 ) will be vertical.

3.
Tighten the two key bolts to secure the hi-hat holder
(!1 ) in place.

1.
Loosen the four key bolts at the ends of the first/sec-
ond tom part, which was attached in
2.
Take the cymbal holders (!0 ) from the package and
insert them into the ends of the first/second tom part.
Then adjust the angles of the cymbal holders until they
are oriented as shown in the figure.
NOTE
The two cymbal holders are identical.
•
When correctly inserted, the tips of the cymbal hold-
ers (!0 ) will protrude slightly from the bottom of the
tom part.
•
When correctly oriented, the cymbal holders (!0 ) will
be as shown in the figure.

3.
Tighten the four key bolts to secure the cymbal hold-
ers (!0 ) in place.
DTX400K/DTX430K/DTX450K
Assembly Guide
Left arm
.
Step 6
.
15
Owner's Manual