Easy Session
Easy Session training lets you play a drum pattern along with an accompanying song simply by striking any pad(s) in time. As
such, it is not unlike a basic form of jamming with other band members. Please note that this type of training is not scored.
1.
Press the [TRAINING] button to activate Training
Mode.
2.
Press number button [6].
The [
] button will flash, indicating that the drum
module is on standby to start training.
3.
Press the [
] button to start the accompaniment.
4.
Play the pads along with the accompaniment.
•
Regardless of which pad(s) you strike, the drum mod-
ule will play the correct sounds for the drum pattern.
For this reason, you will not necessarily hear the pad
you strike.
•
If you stop playing the pads, the drum module will
stop playing the drum pattern.
•
The half-lit number buttons provide a guide to varia-
tions in the drum pattern.
Half lit = When to strike the pad(s)
•
In order to play the drum pattern correctly, the pads
must be struck at precisely the timing indicated by the
half-lit number buttons.
•
To select a different song while training, hold down
the [SONG] button and press the corresponding num-
ber button ([1] to [10/0]).
5.
To end training, press the [
NOTE
The [DRUM MUTE] button is not used with this type of train-
ing.
1
4
3, 5
] button once again.
2
4
DTX400K/DTX430K/DTX450K
Practicing in Training Mode
Owner's Manual
35