Yamaha DTX400K Owner's Manual page 14

Assembly Guide
The details of
For DTX430K Owners
Step 7
Attaching the snare
pad
1.
Loosen the wing bolt on the joint on
the left arm, which was attached in
Step 4
.
Wing bolt
Joint
2.
Rotate the joint 90° counter-clockwise, making the joint
section horizontal.
3.
Securely tighten the wing bolt.
4.
Loosen the  key bolt on the joint.
5.
Take the snare pad (i) from the package and slide it
fully into the joint.
6.
Tighten the  key bolt to secure the snare pad (i) in
place.
14
DTX400K/DTX430K/DTX450K
Step 7 are different for the DTX400K, DTX430K, and DTX450K.
Left arm
90°
i
i
Owner's Manual
For DTX450K Owners
Step 7
Attaching the snare
pad
1.
Loosen the wing bolt on the joint on
the left arm, which was attached in
Step 4
.
Wing bolt
Joint
2.
Rotate the joint 90° counter-clockwise, making the joint
section horizontal.
3.
Securely tighten the wing bolt.
4.
Loosen the  key bolt on the joint.
5.
Take the hexagonal rod (u) from the package and slide
it fully into the joint.
6.
Tighten the  key bolt to secure the hexagonal rod (u)
in place.
7.
Take the snare pad (i) and the S wing bolt (o) from
the package and lightly tighten the S wing bolt (o).
(Five or six turns is sufficient.)
o
8.
Place the snare pad (i) on the hexagonal rod (u),
6.
which was attached in
Then tighten the S wing bolt (o) to secure the snare
pad (i) in place.
u
9.
Loosen the  key bolt and adjust the angle of the snare
pad. When finished, retighten the  key bolt to secure
the snare pad in place.
Left arm
90°
u
i
above, and slide it fully back.
i
o