Using The Number Keypad; Starting Playback - Yamaha disklavier DKC-850 Operation Manual

Using the Number Keypad

Album or song selection screen Number button
You can also select albums or songs directly with the number keypad on
the remote control.
Press the corresponding number button, then press
[ENTER].
For example, to select album number 5, first press [0], then [5],
then [ENTER] in the album selection screen.
To select song number 36, first press [0], then [3], then [6], then
[ENTER] in the song selection screen.

Starting Playback

[PLAY]
Press [PLAY/PAUSE] on the front panel or [PLAY] on the
remote control.
[PLAY/PAUSE] on the front panel lights green, and the numerical
value of the counter advances.
or
Front panel Remote control
At the end of the song, the Disklavier control unit selects the next
song automatically and continues playback.
After playback the last song in the album, playback stops.
=ALBUM SELECT= 0-9/ENT
05:
SONG SELECT 0-9/ENT
36:
=Memory=
A02-001 Piano Sonate
<00:01>
Note:
If you enter a number higher than
the existed, the last album or song
appears.
Note:
If your piano is in the Silent Piano™
function mode, the damper pedal
does not move. However, the
damper effect is effective for the
piano tone.
LR SO V+00
Chapter
3
Basic Song Playback
25