Installing The Ink Cartridges - Brother DCP-130C - Color Inkjet - All-in-One Quick Setup Manual
Quick setup guide - english
Hide thumbs
Also See for DCP-130C - Color Inkjet - All-in-One:
- User manual ,
- Service manual (383 pages) ,
- Software user's manual (155 pages)
Table of Contents
Advertisement
STEP1
Setting Up the Machine
4
Installing the ink cartridges
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
2
Open the ink cartridge cover (1).
3
Pull all the lock release levers down and
remove the yellow protective part (1).
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.
6
4
1
5
1
Take out the ink cartridge.
Carefully remove the protective yellow cap (1).
1
Improper Setup
DO NOT touch the area shown in the
illustration below.
Note
If the protective yellow cap comes off when you
open the bag, the cartridge will not be damaged.
Advertisement
Table of Contents
Need help?
Do you have a question about the DCP-130C - Color Inkjet - All-in-One and is the answer not in the manual?