Preparation Before Washing - Haier HWM100-828A User Manual

Connection between the water inlet hose and the washer
1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 .Put the nut of the water inlet hose on the valve jointer.
3 .Fasten the nut. Swing it gently to confirm if it's suitable.
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept on the faucet to prevent damaging the fixing screw.
8
nut of the water
inlet hose
jointer of the
water absorption
water inlet valve cushion.
the jointer of the
water inlet hose
Locking level
Slider
Locking level
Slider

1 Preparation before washing

Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
3.Put down the drain hose.
4.Slanting or uneven ground may result in
Pay attention to followings before washing the laundries
Confirm if there's Clear the pocket.
Fasten the buttons
Take out the coins ,
special requirement
and zippers.
for the laundries. sand, hairpins etc.
a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries with unfast color from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
please apply detergent in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals directly into the washing machine.
g. For those small laundries and those may get twisting or worn, and woollen/fur laundries, please put them into
mesh bag for washing.
reliably. Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
unstable working or abnormal noise. Please
make the machine stand horizontally.
The quantity of the When the pulsator is
laundries shall not
running ,the buttons of
exceed the rated the laundries may cause
value. The big noise. For the sake of
laundries like the
discretion ,please put
jeans shall be put the laundries with
in loosely.
buttons into other
laundries.
9