Getting Started; Initial Setup; Setting The Date And Time - Brother 8840DN - B/W Laser - All-in-One User Manual

4

Getting started

Initial Setup

Setting the Date and Time

Your MFC displays the date and time and if you set up the Station ID
it prints on every fax you send. If there is a power failure, you may
have to reset the date and time. All other settings will not be affected.
1
Menu
Press
2
Enter the last two digits of the year.
Set
Press .
3
Enter two digits for the month.
Set
Press .
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Set
Press .
(For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Set
Press .
(For example, enter 15:25 for 3:25 P.M.)
6
Stop/Exit
Press
whenever the MFC is in Standby mode.
0 2
, , .
. The LCD now shows the date and time
02.Date/Time
Year:20XX
Enter & Set Key
GETTING STARTED 4 - 1