Printing Reports; Mfc Settings And Activity; Customizing The Transmission Verification Report - Brother 8840DN - B/W Laser - All-in-One User Manual

9

Printing reports

MFC settings and activity

You need to set up the Transmission Verification Report and Activity
Report Interval in the menu table.
Menu 2
Press ,
—OR—
Menu 2
Press ,
Customizing the
Transmission Verification Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you select On or On+Image, the
report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again. Selecting
On+Image or Off+Image will print a section of the fax's first page
on the report to help you remember.
When the feature is Off, the Report will only print it there is a
transmission error. (NG).
1
Menu
Press
2
Press
Off+Image, ON or On+Image.
Set
Press .
3
Stop/Exit
Press
9 - 1 PRINTING REPORTS
4 1
, , .
4 2
, , .
2 4 1
, , , .
or to select Off,
.
24.Setup Reports
1.Transmission
2.Act.Interval
▲▼
Select & Set
24.Setup Reports
1.Transmission
▲
Off
▼
Off+Image
▲▼
Select & Set