Xerox 4110 User Manual page 86

4. W i n do w s 2 00 0 /X P a n d W i nd ow s S e r v e r 2 00 3
Covers
Transparencies
Images
4- 1 6
Specifies the settings related to Covers.
NOTE: The cover cannot be printed.
• Front Cover - Specify whether to add a front cover to the
printouts. Select the paper tray for feeding the front cover
sheets.
• Back Cover - Specify whether to add a back cover to the
printouts. Select the paper tray for feeding the back cover
sheets.
• Tray 8 - Specify Tab Stock - Specify whether tab stock is
being loaded in tray 8. Select either "Plain" or "Tab Stock."
Set up separators to be inserted between transparencies.
• Feed Separators from - Specifies the paper tray that
transparency dividers are to be fed from. When [Auto] is
selected, the tray set on the machine is used as the feed
destination.
• Print on Separators - Specifies whether or not to print on the
transparency dividers as well as the transparency.
Set up image-related settings.
• Print Mode - Specifies whether to give priority to the print
speed or the image quality.
• Halftone - Select the halftone settings for printing.
– Select [Fine Dots] for the small size halftone dot commonly
used in PostScript.
– Select [Thick Dots] for coarser dots than the Fine Dots
setting.
– Select [Type 3] for the same halftone setting that is used in
PCL.
• Image Enhancement - Specifies whether or not to use the
Image Enhancement function. Selecting [On] smooths out
boundaries when printing. This reduces jagged edges by
artificially increasing the resolution of the image. When printing
a bitmapped image composed of coarse halftone dots, smooth
color or grayscale gradation is impossible in certain situations.
In this case, select [Off].
X e r o x 4 11 0/ 4 59 0 P os t S c r i pt U s er G ui d e