Xerox 4110 User Manual page 69

Image Border
Print Booklet
Output Size for Booklet
Booklet Subsets
Margin Shift
X er o x 4 110 /4 5 90 P o s tS c r i p t Us e r G ui d e
Select this check box to add a border around every page of the
original document when printed in Multiple-Up layout.
Specify the assembling and finishing methods for booklet creation.
You can check the result of the change in setting on the preview
image at the top right of the screen.
KEY POINT: "Booklet Creation" feature will only be available if
"Automatically Select" or "Auto Paper Select (Type)" is selected in
"Paper Source" on the "Paper/Output" tab.
Specify the output size for booklet creation printing.
NOTE: When "Booklet Creation" is selected, only "AutoSelect
Tray" and "Auto Paper Select (Type)" are available in "Paper
Source" on the "Paper/Output" tab. Conversely, "Booklet Creation"
feature is only available when "Automatically Select" or "Auto
Paper Select (Type)" is selected in "Paper Source."
Specify the number of sheets in each subset when printing booklet
in subsets. Select from "None," or "Every Sheet" to "Every "20
Sheets."
Clicking this button displays the "Margins" dialog box. Enter the
position and the extent of the margin shift on the paper.
• Position - Specifies the margin shift (binding margin)
position. The margin can be added to the left, right, top, or
bottom of the paper. The margin positions change according to
the paper orientation.
KEY POINT: If setting other than "Off" is selected in "Print
Booklet" on the "Layout" tab, only "No Shift" will be available in
"Position."
• Side 1 - Specifies the margin on side 1 of the paper when
using the "Margin Shift" function.
– You can specify any value between 0 and 50 mm in units
of 1mm using the keyboard or the up and down arrows.
– You can use the keyboard or the up and down arrows to
specify a value.
3. W in d ow s N T 4. 0
3-23