Xerox 4110 User Manual page 108

5. M a c i nt os h c o m pu t er s
Hole Puncher Setup
High Capacity Feeder
Tri-Folding Output Tray
Booklet Output Tray
Memory
Paper Size Settings
5- 1 2
For Mac OS X
This section describes Installable Options for Mac OS X.
1.
Click [Printers] on the Print Center menu bar, and select [Show
Info].
For Mac OS X v10.3.3, click [Printers] on the Printer Setup
Utility menu bar, then select [Show Info].
2.
Select [Installable Options], and select the options that have
been installed on the printer.
Settings
Specify the number of holes to punch on the paper. Select from "2
Holes/4 Holes" or "3 Holes."
Select "Available" if the High Capacity Feeder has been installed.
Select "Available" if the Tri-Fold Output Tray is installed.
Select "Available" if the Booklet Tray is installed.
The built-in memory is 512MB.
Specify the paper size group for different locales to enable the
selection of paper sizes common to that locale. The following
groups of paper size categorized by locale are available: "AB
Series," "AB Series (8K/16K)," "AB Series (8 x 13")," "AB Series (8
x 13"/8 x 14")," and "Inch Series." As the paper size settings will
be set automatically in accordance with the relevant locale, it is
usually not necessary to change this setting.
X e r o x 4 11 0/ 4 59 0 P os t S c r i pt U s er G ui d e