Deleting a Path
To delete a path from the Paths table
following:
1.
2.
Editing the LAN01 Path
The LAN01 path is a system generated path that points to the
local LAN. You cannot edit all the properties for the path.
To display the LAN01 properties, do the following:
1.
2.
3.
4.
118814-A Rev. A
In the Paths table select the path to delete.
Click on the Delete button.
In the Nautica Wizard window
that contains the path to be edited.
Click on
Advanced > Paths.
In the Paths table
and then click on the Edit button at the bottom of the
Paths table.
The Edit Router LAN Path window
(Figure
(page
(Figure
8-1), click on the LAN01 path
Issue 1
Configuring Paths
8-1), do the
6-6), select the unit
(Figure
8-2) appears.
8-3