Connection Failure; Figure 6-8. Connection Failure - Bay Networks CLAM Reference Manual

1.
2.
Caution:
the unit from the power supply, all changes you have made will
be lost. Changes will also be lost if the unit is rebooted without
first saving the new configuration.

Connection Failure

If no devices are attached to the network, or the devices are not
connected properly, Nautica Wizard will display the following
message:
Figure 6-8.
Make sure the devices are connected properly to the LAN, or
check the settings for your PC to make sure it can communicate
with the LAN correctly. If Nautica Wizard continues not to find
the devices, consult the supplier of your equipment.
The following chapters deal with the various elements that can be
configured in more detail using Nautica Wizard commands.
118814-A Rev. A
Select the unit which needs to be saved (it will be flashing
yellow in the Nautica Wizard window).
Click on
Advanced > Save Configuration
If you do not Save the changes, and then disconnect
Connection Failure
Issue 1
Basic Procedures
.
6-15