Amending Polling Intervals - Bay Networks CLAM Reference Manual

You will be asked to specify the IP address of the new unit:
Figure 15-7.
Type the new IP address into this screen and click on OK to
connect to a new unit, or click on Cancel to close the window.

Amending Polling Intervals

NauticaWatch polls the connected unit at regular intervals in
order to keep all the information it is displaying correct. You can
modify the polling interval by selecting Set Polling Interval from
the Options menu. The Setting the Polling Interval window
appears:
Figure 15-8.
Increase or decrease the polling time and click on OK, or click on
the Cancel button to close this window without making any
changes.
118814-A Rev. A
Setting Unit IP Address Window
Setting the Polling Interval Window
Issue 1
Using NauticaWatch
15-7