3. Convenient Features
TIP:
• When displaying a signal with a different resolution, perform the Edge Blending function from the start.
• Setting of [MARKER] will not be saved and return to [OFF] when the projector is turned off.
• To display or hide the marker while the projector is running, turn on or off [MARKER] from the menu.
• If you want to make differences in white balance and brightness between projectors less visible, adjust [REF. WHITE BALANCE]
and [MULTI-SCREEN COMP.] to obtain the possible best results. (→ page 122)
Black Level Adjustment
If you notice any differences in the brightness of an image, use [BLACK LEVEL] to adjust the darkest part or the level
of brightness.
NOTE:
This function is enabled only when [MODE] is turned on.
Adjustable area varies depending on what combination of [TOP], [BOTTOM], [LEFT] and [RIGHT] are turned on.
Example: Adjusting the Black Level when placing two projectors side by side
Width of overlap
Adjust [CENTER]
Adjust [CENTER]
Projector A's
Projector B's
image
image
Adjust [CENTER-RIGHT]
Adjust [CENTER-LEFT]
1. Turn on [MODE]
2. Select [BLACK LEVEL] and press the ENTER button.
3. Use the or button to select an item and use the or to adjust the black level.
Do this for the other projector if necessary.
52