NEC NP-PX700W User Manual page 165

WPS
When the wireless LAN access point connected to the projector supports WPS (Wi-Fi Protected Setup TM), you can
use PIN method or push button method to set up the wireless LAN for the projector.
PIN TYPE
PUSH BUTTON TYPE
NETWORK INFORMATION
The following information will be displayed when the projector is connected to a network (wired LAN or wireless
LAN).
PROJECTOR NAME
HOST NAME
DOMAIN
NETWORK INFOR-
MATION (WIRED
LAN/WIRELESS LAN)
DISPLAY THE INFOR-
MATION IN APPLICA-
TION MENU
The meanings of these status statements are described below.
Statement
Authenticated
Failure
Authenticating...
Expired
Time Error
Set a 4-digit or 8 digit-PIN code of WPS for your access point to complete setting for the
SSID security.
Press the dedicated button of the access point and the projector's wireless LAN unit to
complete setting for the SSID security.
CONNECTION STATUS, IP ADDRESS, SUBNET MASK, GATEWAY, WINS, DNS, MAC
ADDRESS, SSID, NETWORK TYPE, WEP/WPA, CHANNEL, SIGNAL LEVEL, AU-
THENTICATION, AUTHENTICATION PERIOD
Turn on or off the display of the network information.
Authentication is done correctly.
Authentication failed.
Authentication is in process.
The digital certificate is expired. Or [DATE, TIME PRESET] is not set correctly.
The [DATE, TIME PRESET] has been cleared. Set the correct date and time.
Authentication status
151
5. Using On-Screen Menu