NEC NP-PX700W User Manual page 118

Entering the currently projected signal into the Entry List [STORE]
1. Press the  or  button to select any number.
2. Press the  or  button to select [STORE] and press the ENTER button.
Calling up a signal from the Entry List [LOAD]
Press the  or  button to select a signal and press the ENTER button.
Editing a signal from the Entry List [EDIT]
1. Press the  or  button to select a signal you wish to edit.
2. Press the , , , or  button to select [EDIT] and press the ENTER button.
The Edit window will be displayed.
SOURCE NAME
INPUT TERMINAL Select the input source.
LOCK
SKIP
3. Set the above items and select [OK] and press the ENTER button.
NOTE: The input terminal cannot be changed to the currently projected signal.
Enter a signal name. Up to 18 alphanumeric characters can be used.
Set so that the selected signal cannot be deleted when [ALL DELETE] is executed. The
changes made after LOCK execution cannot be saved.
Set so that the selected signal will be skipped during auto search.
104
5. Using On-Screen Menu