About This User's Manual - NEC NP-PX700W User Manual

• Slot for optional board
The projector has a slot for the optional board (SB-01HC or other NEC's interface boards).
• High picture quality processing circuit
The Reon-VX video processor is used to project high quality images.
• Energy-saving design with a standby power consumption of 0.4 Watts or less
When the on-screen menu's standby mode is set to "Power Saving", the power consumption in the standby mode
is 0.2 W (100-130 V AC)/ 0.4W (200-240V AC).
• "Eco mode" for low power consumption and "Carbon Meter" display
The projector is equipped with an "eco mode" for reducing power consumption during use. Furthermore, the
power-saving effect when the eco mode is set is converted into the amount of reductions of CO
this is indicated on the confirmation message displayed when the power is turned off and at "Information" on the
on-screen menu (CARBON METER).
• Seamless switch function for smoother screen changes when switching the signal (for PX750U only)
When the input connector is switched, the image displayed before switching is held so that that projector can write
the new image without going to black.
• Simultaneous display of 2 images (PIP/PICTURE BY PICTURE)
Two images can be projected simultaneously with a single projector.
There are two types of layouts for the two images: "picture-in-picture" in which a sub-picture is displayed on the
main picture, and "picture-by-picture" in which the main and sub pictures are displayed next to each other.
• Security function for preventing unauthorized use
This projector is equipped with the following security functions:
- Password security: When a password is set in the on-screen menu, a screen to input the password appears
when the projector's power is turned on.
- Theft prevention lock: A security cable compatible with Kensington locks can be connected to the projector.
• Wired/wireless LAN compatibility (wireless LAN unit sold separately)
The projector is equipped with a LAN port (RJ-45) for connection to a wired LAN for transferring images from a
computer to the projector, controlling the projector from a computer, etc.
Furthermore, the projector can be used in a wireless LAN by mounting the separately sold wireless LAN unit
(NP02LM).
• Convenient utility software (User Supportware) provided as standard
Three utility software programs (Image Express Utility 2.0, PC Control Utility Pro 4, Image Express Utility 2 for Mac)
are provided on the included NEC Projector CD-ROM. Two more utility software programs can be downloaded
from our website: Virtual Remote Tool and Viewer PPT Converter 3.0.
• LAN-compatible viewer function
Still and moving images in shared folders on a computer connected by wired or wireless LAN can be projected
with the projector's viewer.
- The viewer supports the Windows Media Player 11's "media sharing" function.
• CRESTRON ROOMVIEW compatibility
The projector supports CRESTRON ROOMVIEW, allowing multiple devices connected in the network to be managed
and controlled from a computer or controller.

About this user's manual

The fastest way to get started is to take your time and do everything right the first time. Take a few minutes now to
review the user's manual. This may save you time later on. At the beginning of each section of the manual you'll find
an overview. If the section doesn't apply, you can skip it.
3
1. Introduction
emissions and
2