NEC NP-PX700W User Manual page 119

Cutting a signal from the Entry List [CUT]
1. Press the  or  button to select a signal you wish to delete.
2. Press the , , , or  button to select [CUT] and press the ENTER button.
The signal will be deleted from the Entry List and the deleted signal will be displayed on the clipboard at the bottom
of the Entry List.
NOTE:
• The currently projected signal cannot be deleted.
• When the locked signal is selected, it will be displayed in gray which indicates it is not available.
TIP:
• Data on the clipboard can be passed onto the Entry List.
• Data on the clipboard will not be lost after the Entry List is closed.
Copying and pasting a signal from the Entry List [COPY] / [PASTE]
1. Press the  or  button to select a signal you wish to copy.
2. Press the , , , or  button to select [COPY] and press the ENTER button.
The copied signal will be displayed on the clipboard at the bottom of the Entry List.
3. Press the  or  button to move to the list.
4. Press the  or  button to select a signal.
5. Press the , , , or  button to select [PASTE] and press the ENTER button.
Data on the clipboard will be pasted to the signal.
Deleting all the signals from the Entry List [ALL DELETE]
1. Press the , , , or  button to select [ALL DELETE] and press the ENTER button.
The confirmation message will be displayed.
2. Press the  or  button to select [YES] and press the ENTER button.
NOTE: The locked signal cannot be deleted.
105
5. Using On-Screen Menu