NEC NP-PX700W User Manual page 156

7000-lumen widescreen professional installation projector
Hide thumbs Also See for NP-PX700W:
Table of Contents

Advertisement

SITE SURVEY
SECURITY
SSID
NETWORK TYPE
CHANNEL
Displays a list of available SSIDs for wireless LAN on site. Select
an SSID which you can access.
To select an SSID, highlight [SSID] and use the  to select [OK]
and press the ENTER button.
����������������������� Wireless access point
����������������������� Ad Hoc PC
����������������������� WEP or WPA enabled
This will turn on or off the encryption mode for secure transmis-
sion.
To use encryption, specify a WEP key or encryption key. Select
your security type appropriate for your computer and the wire-
less LAN unit.
DISABLE ���������������� Will not turn on the encryption feature� Your com-
munications may be monitored by someone�
WEP(64bit) ������������ Uses 64-bit datalength for secure transmis-
sion�
WEP(128bit) ���������� Uses 128-bit datalength for secure transmission.
This option will increase privacy and security
when compared to use of 64-bit datalength en-
cryption�
WPA-PSK/WPA2-PSK/WPA-EAP/WPA2-EAP
������������������������������ These options provide stronger security than
WEP�
NOTE:
• The security type, WEP key, and encryption key settings must be the
same as communication devices such as PC or access point in your
wireless network.
• When you use [SECURITY], your image transmission speed will slow
down.
• [WPA-PSK], [WPA-EAP], [WPA2-PSK] and [WPA2-EAP] are not avail-
able when [AD HOC] is selected from [NETWORK TYPE].
Enter an identifier (SSID) for wireless LAN. Communication can
be done only with equipment whose SSID matches SSID for your
wireless LAN.
Select communication method when using wireless LAN.
INFRASTRUCTURE ���Select this option when communicating with
AD HOC ��������������������Select this option when using the wireless LAN
Select a channel. Available channels vary depending on the
country and region.When you select [INFRASTRUCTURE], make
sure that the projector and your access point are on the same
channel; when you select [AD HOC], make sure that the projector
and your computer are on the same channel.
one or more equipment connected to the wire-
less or wired LAN network via a wireless access
point�
to directly communicate with a computer in
peer-to-peer mode�
142
5. Using On-Screen Menu
Up to 32 alphanumeric
characters (case
sensitive).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents