Menu item
Print Resolution
Toner Darkness
Enhance Fine Lines
Color Saver
RGB Brightness
RGB Contrast
Description
Specifies the printed output resolution
Notes:
•
4800 CQ is the default setting.
•
1200 dpi provides the highest resolution output. This setting
increases gloss.
Lightens or darkens the printed output
Notes:
•
4 is the default setting.
•
Selecting a smaller number can help conserve toner.
•
If Print Mode is set to Black Only, a setting of 5 increases toner
density and darkness to all print jobs.
•
If Print Mode is set to Color, a setting of 5 is the same as a
setting of 4.
Enables a print mode preferable for files such as architectural
drawings, maps, electrical circuit diagrams, and flow charts
Notes:
•
To set Enhance Fine Lines from the software program with a
document open (applicable to Windows users), click File
Print, and then click Properties, Preferences, Options, or
Setup.
•
To set Enhance Fine Lines using the Embedded Web Server,
type the network printer IP address in a browser window.
Reduces the amount of toner used for graphics and images. The
amount of toner used for text is not reduced.
Notes:
•
Off is the default setting.
•
On overrides Toner Darkness settings.
•
Color Saver is not supported in PPDS, and only partially
supported by the PCL emulation printer software.
Adjusts brightness in color outputs
Notes:
•
0 is the default setting.
•
-6 is the maximum decrease. 6 is the maximum increase.
•
This does not affect files where CMYK color specifications are
being used.
Adjusts contrast in color outputs
Notes:
•
0 is the default setting.
•
This does not affect files where CMYK color specifications are
being used.
92
Settings
1200 dpi
4800 CQ
1–5
On
Off
On
Off
-6 to 6
0 to 5