Powered Hand Tool; Agitator Brush Roll; Agitator Belt - Hoover U9145 Owner's Manual

14
The agitator brush roll is designed to last the lifetime of the cleaner. It
typically should not need replacement. If you feel the agitator brush roll
needs to be checked or replaced, take your cleaner to an Authorized
Hoover Sales and Service Center. Do not attempt to remove the

agitator brush roll.

The agitator cavity underneath the cleaner can be checked for
debris such as hair, strings, etc.
Disconnect cleaner from electrical outlet. Turn cleaner over and
remove any debris that has accumulated on the agitator brush roll. Do
not attempt to remove the agitator brush roll.
Return the cleaner to upright position.
The agitator belt is designed to last the lifetime of the cleaner. It typically
should not need replacement. If you feel the agitator belt needs to be
checked or replaced, take your cleaner to an Authorized Hoover
Sales and Service Center. Do not attempt to remove the agitator
belt.
A
Agitator brush roll replacement
When agitator brushes on the powered hand tool are worn, the
brush roll should be replaced. Ask for HOOVER part No.
48414088.
How to replace
B
31
plate (A).
32
3. Remove agitator including end plates (C) and discard.
C
Agitator brush roll

Agitator belt

Powered hand tool

1. Remove tool from hose and turn it so bottom faces up.
Press the latches on either side of tool and remove bottom
2. Unscrew the two Phillips screws and remove belt guard (B).