Auto Power Off Function; Setting The Confirmation Sound (System Sound); Speaker Setting; Fan Mode Setting - Eiki EIP-1000T Owner's Manual

3 Auto Power Off
3 3 3 3
Function
Selectable
items
On When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
The Auto Power Off function will be
Off
disabled.
Note
• When the Auto Power Off function is set to
"On", 5 minutes before the projector enters
standby mode, the message "Enter STANDBY
mode in X min." will appear on the screen to
indicate the remaining minutes.
4 Setting the Confirmation
4 4
4 4
Sound (System Sound)
Selectable
items
On A confirmation sound is made when
the projector turns on/off.
Off No confirmation sound is made.

5 Speaker Setting

5 5
5 5
Selectable
items
On The audio signal is output from the
internal speaker.
Off The audio signal is not output from the
internal speaker.
Description
Description
Description
Menu operation n Page 39

6 Fan Mode Setting

6 6 6 6
This function changes the fan rotation speed.
Selectable
items
Normal Suitable for normal environments.
High Select this when using the projector at
altitudes of approximately 4,900 feet
(1,500 meters) or more.
When "Fan Mode" is set to "High", the fan rotation
speeds up, and the fan noise becomes louder.
7 Checking the Lamp Life
7 7
7 7
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
Lamp usage condition
"Life"
Operated exclusively
with Lamp Setting set to
"Eco + Quiet"
Operated exclusively
with Lamp Setting set to
"Bright"
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The lamp life may vary depending on the us-
age condition.
Description
Remaining lamp life
100% 5%
Approx. Approx.
3,000 150 hours
hours
Approx. Approx.
2,000 100 hours
hours
45