Rear View - Eiki EIP-1000T Owner's Manual

Part Names and Functions (Continued)
Numbers in Z refer to the main pages in this owner's manual where the topic is
explained.

Rear View

Intake vent
AC socket
Connect the
supplied Power cord.
Rear adjustment
foot
1
Terminals
Terminal
INPUT 1, 2 terminal
I Connecting video equipment with component output terminal
(DVD player, DTV decoder, DVD recorder with hard disc, etc.).
1
I Connecting the computer.
AUDIO (INPUT 1, 2) terminal
2
Connecting an audio cable (Shared audio input terminal for INPUT 1 and 2).
OUTPUT (INPUT 1, 2) terminal
Connecting the monitor when you want to simultaneously watch the
3
projection image on the monitor. (Shared computer RGB and
component signals output terminal for INPUT 1 and 2).
INPUT 3 terminal
Connecting video equipment with S-video output terminal (VCR, DVD
4
player, etc.).
RS-232C terminal
5
Use the DIN-D-sub RS-232C adaptor (supplied) to connect to the
RS-232C port of the computer.
AUDIO OUTPUT terminal
Connecting to an amplifier or other audio equipment with an audio cable
6
(commercially available) (Shared audio output terminal for INPUT 1, 2, 3 and 4).
INPUT 4 terminal
7
Connecting video equipment without S-video output terminal.
AUDIO (INPUT 3, 4) terminal
8
Connecting an audio cable (Shared audio input terminal for INPUT 3 and 4).
12
47
28
31
2 3
6
Description
Serviceman only
Using the Kensington Lock
• This projector has a
Kensington Security Standard
4 5
connector for use with a
Kensington MicroSaver
Security System. Refer to the
information that came with the
system for instructions on how
to use it to secure the
projector.
7 8
Exhaust vent
47
Speaker
45
Kensington Security
Standard connector
Page
23
25
23
25
26
24
–
27
24
24