Connecting To Video Equipment - Eiki EIP-1000T Owner's Manual

Connecting to Video Equipment

Before connecting, ensure that the power cord of the projector is unplugged from the AC
outlet and turn off the devices to be connected. After making all connections, turn on the
projector first and then the other devices.
The projector is equipped with input terminals that support component, S-video, and video signals.
See the illustration below to connect with the audio-visual equipment.
The image quality is highest in the order of the component signal, the S-video signal and the video
signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/
COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.
When connecting to equipment with component output terminal (INPUT1 or
INPUT2)
To audio output
To component output
terminal
(Y, C /P
B B
ø3.5 mm minijack to RCA
audio cable* (commercially
available)
*Use the cable when you want to
enjoy the sound from the projector's
speaker.
, C /P ) terminal
R R
DVD, etc.
Component cable
(commercially
available)
Supplied
accessory
To INPUT1 terminal
3 RCA to 15-pin
D-sub adaptor
To AUDIO (INPUT1, 2)
terminal
3 RCA to 15-
pin D-sub
adaptor
23