Connecting To A Computer; Using - Eiki EIP-1000T Owner's Manual

Connecting to a Computer

When connecting a computer, ensure that it is the last device to be turned on after all the
connections are made.
Ensure that you have read the owner's manuals of the devices to be connected before making
connections.
To audio output terminal
To RGB output terminal
* ø3.5 mm stereo or
mono audio cable
(commercially
available)
* When using the ø3.5 mm mono audio cable, the volume level will be half of
when using the ø3.5 mm stereo audio cable.
Note
• See page 54 "Computer Compatibility Chart" for a list of computer signals compatible with the projec-
tor. Use with computer signals other than those listed may cause some of the functions to not work.
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your near-
est Macintosh Dealer.
• Depending on the computer you are using, an image may not be projected unless the
computer's external output port is switched on. Refer to the specific instructions in the owner's
manual of your computer to enable your computer's external output port.
Supplied
Computer
accessory
RGB Cable
(commercially available)
To INPUT1 terminal
To AUDIO
(INPUT1, 2)
terminal
25