Cisco SPA303 User Manual page 10

Getting Started
Getting to Know the Cisco SPA 301
Cisco Small Business IP Phone SPA 30X User Guide (SPCP)
# Phone Feature
1 Handset
2 Message Waiting/
Status Indicator
3 Ringer button
4 Messages button Press to access voice mail (must be set up by your
5 Flash button
6 Redial button
7 Volume button
8 Keypad
Description
Pick up to place or answer a call.
The LED color and action indicates the phone or
message status:
• Red (solid)—You have a new voice mail message.
• Red (fast blinking)—You have an incoming call.
• Red (slow blinking)—You have a call on hold.
• Red (series of two fast blinks)—Your phone has
temporarily lost its Ethernet connection.
• Orange (fast blinking)—Your phone's firmware is
upgrading.
• Orange (slow blinking)—Your phone is
downloading firmware.
• Orange (series of two fast blinks)—Your phone
has permanently lost its Ethernet connection.
When the phone is reconnected, it will reboot.
• Green (solid)—You have an active call on the
phone (the phone is off-hook).
Push to the On position to turn the ringer on. Push to the
Off position to turn the ringer off.
phone administrator).
Press to place a call on hold and open another line.
Press to redial the last number called.
Press repeatedly to increase the volume of the handset
(when the handset is off the phone) or ringer volume
(when the handset is on the phone).
Use to dial phone numbers.
1
8