Step 3. Attach the skin without the lap joint (front) over the top bracket and under the bottom bracket and
gently slide the skin into position.
Figure 2-18Attaching the Front Side Skins
Step 4. Push the side skins together, making sure the skins overlap at the lap joint.
Attaching the Blower Side Bezels
The bezels are held on at the top by the bezel lip, which fits over the top of the blower housing frame, and is
secured at the bottom by tabs that fit into slots on the cabinet side panels.
The right and left blower side bezels are attached using the same procedure.
Chapter 2
Setting Up the hp Integrity Superdome or hp 9000 Superdome
Installing the System
41