Architecture Files - HP Integrity Superdome SX1000 User Manual

JUST Exploration Tool
Data Files
Example G-8 Typical cplx.ini File
COMPLEX zurg-s 0x20
COMPLEX feynman-s 0x30
COMPLEX feynman-s 0x30
Board Name Mapping File
The board_name.map file has two basic purposes. The first is to map board names to board part numbers.
This mapping is required, because the part numbers in the EPROMs are changed to indicate repair history of
the board. JET must be able to provide the JUST tool with part number matching its data files. The second is
to support the JET interactive mode. This file contains scan handle values that map a board name with the
type of board that name represents. When a user is adding a board of a specific type, JET looks though this
file to find the name of all boards matching the specified type. It then displays a list of these board names for
the user to select.
This file is located by the default path search with the subdirectory arch_<arch_code>/cmd appended to the
base path, unless it exists in the ./config directory.
Format
Comments Comments in the board_name.map file are specified by placing a # character at the beginning of the line
containing the comment. End of line comments are not currently supported.
Version The first non-comment field in the board_name.map file must start with the keyword FILE_VERSION followed by
the version number entered as a double.
FILE_VERSION <version number>
Board Entries Each board in the system has an entry in this file, which consists of the following information:
Board name—String representing the board name
Board part number—String representing the board part number to place in the node configuration file for this board
Scan Revision—Scan revision of the board
Board family—Board family scan handle value
Board type—Board type scan handle value
Example G-9 Board Entries With Comments
####################################################################
#<board family> <board part num> <scan revision> <board family> <board type>
####################################################################
HIOB A4856-60001

Architecture Files

Architecture files describe the system architecture, providing complex, node, board, and device information
needed to properly interrogate the complex.
Complex Architecture File
This file describes the complex and contains information on the types of entities in the complex. Currently
valid entity types are MPs and nodes. This file must have the name complex.arc.
288
SH MP 0 1.0
MH host_1 MP 0 1.0
MH host_2 MP 0 1.0
1 2 3
TCP 15.99.83.130 5151
UDP 19.99.83.101 5151
TCP 15.99.83.102 5151
Appendix G