Table of Contents
Advertisement
Once you click 'Save', you are returned to the main filter page. The new filter you just defined
9.
is shown in the list. However, the checkbox to the left of the filter definition is empty,
indicating that the filter is not enabled.
The
new
filter
Enable the filter by clicking the box that appears to the right of the 'Edit' button.
10.
Checkbox
Click 'Save'. This makes the filter operational.
11.
Note: Unlike other configurations settings, you do not have to reset the Eicon 1530 to make filters
operational.
'Edit Filters' Page Options
Action
• 'Drop': Discard data that matches the filter definition.
• 'Forward': Send data that matches the filter definition to the filter output.
• 'Forward if connected': Send data that matches the filter definition to the filter output, if a
connection is open.
Direction
• 'incoming': Data being received by the Eicon 1530 originating from the external network.
• 'outgoing': Data being sent by the Eicon 1530 to the external network.
• 'all': Both incoming and outgoing.
Security
56
Advertisement
Table of Contents
