Eicon Networks 1530 User Manual page 109

SET PASSWORD { CLIPASS | WEBPASS } password
Defines the password that users need to specify when logging on. The password is
case-sensitive, which means 'PASS' and 'pass' are not the same.
Range: 0-11 characters, no spaces. Default: none (no password required to log in).
You can specify a separate password for the CLI and web interfaces.
CLIPASS: Defines a password for accessing the command line interface.
WEBPASS: Defines a password for accessing the web interface.
SET SYSTEM NAME name
Sets the domain name of the Eicon 1530. This is also the address of the home page of the
web-based configuration interface. The text '.wanrouter' is appended to the name you enter.
Range: 1-64 characters, no spaces. Default: eicon1530 ('eicon1530.wanrouter').
SHOW COMMAND [ALL]
Displays a list of commands available in the current context.
All commands will be shown if ALL is specified.
SHOW LED STATUS
Displays the current status of the Eicon 1530 indicator lights.
SHOW SYSTEM STATUS
Displays system information such as firmware version.
SHOW VERSION
Displays the firmware version of your device.
SHOW ICMP STATISTICS
Displays ICMP statistics.
ENABLE REMOTE
DISABLE REMOTE
When enabled, allows remote computers to connect to the Eicon 1530 WAN Router and access
its configuration interfaces. A remote computer is considered to be any computer that is not on
the local LAN. It is strongly recommended that you define a system password if you enable this
option.
Default: Disabled.
Command Line Interface 109