Eicon Networks 1530 User Manual page 117

ADD DHCP STATICMAP ipAddress MACaddr
Adds a new entry to the STATICMAP table. This table contains the list of static IP address
assignments used by the Eicon 1530 when it is acting as a DHCP server. Each entry defines an
IP address and IP mask for a specific MAC address.
ipAddress: IP address in dotted-decimal notation.
MACaddr: MAC (Ethernet) address of the target device. This address must be 12 hexadecimal
digits separated by colons, commas, or hyphens (11:22:33:44:55:66 for example).
SET DHCP STATICMAP ip macaddr
Modifies the definition of an existing entry in the STATICMAP table. See ADD DHCP
STATICMAP for complete details.
ipAddress: IP address in dotted-decimal notation.
MACaddr: MAC (Ethernet) address of the target device. This address must be 12 hexadecimal
digits separated by colons, commas, or hyphens (11:22:33:44:55:66 for example).
DELETE DHCP STATICMAP ip
Deletes an entry from the STATICMAP table. See ADD DHCP STATICMAP for complete
details.
ipAddress: IP address of the entry to delete.
SHOW DHCP STATICMAP
Displays the list of defined static DHCP addresses. See ADD DHCP STATICMAP for
complete details.
ENABLE DHCP STATICMAP ip
DISABLE DHCP STATICMAP ip
Enables/disables support for static address assignment when the DHCP server is enabled. See
ADD DHCP STATICMAP for complete details.
Command Line Interface 117