Eicon Networks 1530 User Manual page 131

SET HDLC X32SERVICE { TRANSPAC | CCITT | ERIPAX | NONE } [xid[sig]]
Variations of the HDLC protocol expand upon the protocol to provide additional information to
the host and client systems. Default: NONE.
NONE: Standard implementation of HDLC.
ERIPAX: A variation of HDLC made to work on Ericsson private networks. The ERIPAX XID
helps identify you to other network clients even when you are using a dial-up line.
CCITT: A CCITT standard variation of the HDLC protocol providing parameters to help
identify you to other network clients even when you are using a dial-up line.
TRANSPAC: A variation of HDLC made to work on the Transpac network in France. The
Transpac ID and SID parameters identify you to other network clients even when you are using
a dial-up line.
SHOW HDLC CONFIGURATION
Displays HDLC configuration settings.
SHOW HDLC STATISTICS
Displays HDLC statistics.
SHOW HDLC STATUS
Displays the current HDLC status.
SHOW HDLC TRACE [mask [memsize [framesize]]]
Starts an HDLC trace, or displays an active trace.
mask: 01 I-frames
02 RR frames
04 RNR, REJ frames
08 FRMR, SABM, DISC, UA frames
10 All other frames
memsize: The amount of RAM reserved to store the trace on the Eicon 1530 WAN Router.
Range: 1-63 KB. Default: 16 KB
framesize: Number of characters to show for each frame.
Range: 64-1024 KB. Default: 64 KB
Note: Note: If entered 0 or nothing the default value will be used.
STOP HDLC TRACE
Stops an active HDLC trace.
Command Line Interface 131