Glossary - Kyocera KM-2560 User Manual

Glossary

A Access code
operation panel to print a Private print job. An access code can also be used with the
Job storage feature.
Auto configure
network and automatically retrieves settings for optional devices and memory. Driver
settings will be updated with information received from the physical printing system.
Installed devices will be displayed in the Preview image.
B Booklet
using a duplex unit. Two pages are printed on each side of a sheet to create a
document that can be read like a book.
C Cassette
printer.
Custom box
later printing from the operation panel. Custom box jobs are saved to boxes that are
assigned to users, and can be restricted by password. Your printing system must have
an installed hard disk to use this feature. A maximum of 100 custom boxes can be set
up on the printing system's hard disk, and up to 1000 custom boxes in the driver.
E EcoPrint
text and graphics, appear lighter in the printed job. The actual amount of toner used
depends on the printing system mode and the type of data printed (text, graphics, or
both). EcoPrint does not increase print speed. This feature is also available in the
Quick Print and Basic tabs.
e-MPS
system memory, so that you can print or reprint them later. Print jobs can easily be
reprinted later from the printing system's operation panel, and printing of sensitive
documents can be restricted to approved users.
Enable client profile
accessed by clients in a client/server environment. This feature in the Advanced tab
enables an administrator to control and distribute profiles.
Fast printing
F
Finishing edge
sizes in a document. For example, the long edge of an A4 page is aligned with the
short edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the staple
feature.
GDI compatible mode
G
reproduces what is viewed on the screen using the Microsoft Graphical Device
KX DRIVER
A four-digit code that you must enter at the printing system's
Device settings feature that queries a printing system through the
Layout feature that prints a multi-page document in a booklet format by
A removable plastic tray that holds a supply of paper for input to the
Job option that stores print jobs in the printing system's memory for
Imaging feature that changes toner saturation, making the entire image,
Job storage (e-MPS) is a set of options for saving print jobs in printing
Client profile refers to profile settings saved on a server and
Printing mode that decreases spool size and increases print speed.
Finishing edge aligns the matching sides of two different page
A page description language option that accurately
v