Peripheral Configuration Submenu - Intel BOXD845GVSR Specifications

4.4.3 Peripheral Configuration Submenu

To access this submenu, select Advanced on the menu bar and then Peripheral Configuration.
Maintenance
The submenu represented in Table 53 is used for configuring computer peripherals.
Table 53.

Peripheral Configuration Submenu

Feature
Serial Port A
Base I/O address
(This feature is present
only when Serial Port A
is set to Enabled)
Interrupt
(This feature is present
only when Serial Port A
is set to Enabled)
Parallel port
Mode
Main
Advanced
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Options Description
• Disabled
Configures serial port A.
• Enabled
Auto assigns the first free COM port, normally COM1, the
address 3F8h, and the interrupt IRQ4.
• Auto (default)
An * (asterisk) displayed next to an address indicates a
conflict with another device.
• 3F8 (default)
Specifies the base I/O address for serial port A, if serial port A
is Enabled.
• 2F8
• 3E8
• 2E8
• IRQ 3
Specifies the interrupt for serial port A, if serial port A is
Enabled.
• IRQ 4
(default)
• Disabled
Configures the parallel port.
• Enabled
Auto assigns LPT1 the address 378h and the interrupt IRQ7.
• Auto (default)
An * (asterisk) displayed next to an address indicates a
conflict with another device.
• Output Only
Selects the mode for the parallel port. Not available if the
parallel port is disabled.
• Bi-directional
(default) Output Only operates in AT
• EPP
Bi-directional operates in PS/2-compatible mode.
• ECP
EPP is Extended Parallel Port mode, a high-speed
bi-directional mode.
ECP is Enhanced Capabilities Port mode, a high-speed bi-
directional mode.
Security Power
†
-compatible mode.
BIOS Setup Program
Boot Exit
continued
83