1.7 System Memory
The Desktop Board D845GVSR has two DIMM sockets and supports the following memory
features:
•
2.5 V (only) 184-pin DDR SDRAM DIMMs with gold-plated contacts
•
Unbuffered single-sided or double-sided DIMMs
•
Maximum total system memory: 2 GB; minimum total system memory: 64 MB
•
DDR333/266/200 MHz SDRAM DIMMs only
•
Serial Presence Detect (SPD)
•
Suspend to RAM
Table 4 lists the supported system bus frequency and memory speed combinations.
Table 4.
Supported System Bus Frequency and Memory Speed Combinations
If the processor's system bus frequency is...
533 MHz
400 MHz
CAUTION
Do not use ECC DIMMs with this board. Using ECC DIMMs could damage the board.
#
INTEGRATOR'S NOTES
•
Registered DIMMs are not supported.
•
Double-sided x16 DIMMs are not supported.
✏
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be
populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows
the BIOS to read the SPD data and program the chipset to accurately configure memory settings
for optimum performance.
For information about
Obtaining DDR SDRAM specifications
Obtaining the PC Serial Presence Detect (SPD) Specification
You can use this type of DIMM...
DDR333 or DDR266
DDR266 or DDR200
Refer to
Section 1.5, page 17
Section 1.5, page 17
Product Description
21
Need help?
Do you have a question about the BOXD845GVSR and is the answer not in the manual?
Questions and answers