Table of Contents
Advertisement
Creating a RAID 0 configuration
To create a RAID 0 set:
From the ULI RAID BIOS Setup utility menu, move the cursor to Create
1.
RAID 0 Striping for Performance then press <Enter>.
2.
Use the up or down arrow keys to select a drive then press <Space> or
<Enter>. The striped mark "S" appears before a selected drive.
3.
Repeat step 2 to select the second drive.
4.
The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to the menu.
5.
Key in a RAID name with a maximum of eight (8) alphanumeric characters
then press <Enter>. Do not use special characters or symbols.
6.
The utility displays the RAID Array settings at the bottom of the screen.
Channel 0 Master: XXXXXXXXXXX
Channel 1 Master: XXXXXXXXXXX
Channel 2 Master: XXXXXXXXXXX
Channel 3 Master: XXXXXXXXXXX
RAID Array A
RAID Array B
RAID Array C
ASUS M2A-MVP
Drive Model
Mode
SATA 2
SATA 2
SATA 2
SATA 2
Capacity
RAID Type
:
XXXXX GB
:
:
Capacity
RAID Array/Type
XXXXX MB
RAID A/0x2
XXXXX MB
XXXXX MB
RAID A/0x2
XXXXX MB
Stripe Size RAID Name
0X2
16K
RAID0
2-43
Hide quick links:
Advertisement
Table of Contents
