Table of Contents
Advertisement
Rebuilding a RAID array
This option allows you to rebuild an existing RAID array.
To rebuild a RAID array:
From the ULI RAID BIOS Setup utility menu, move the cursor to Rebuild
1.
RAID Array then press <Enter>.
2.
Use the up or down arrow keys to select the source drive from which to
rebuild then press <Enter>. The striped mark "R" appears before a selected
drive.
3.
The utility prompts if you want to proceed with rebuilding the array.
Press <Y> to continue or press <N> to return to the menu.
Creating a RAID 5 configuration
To create a RAID 5 set:
From the ULI RAID BIOS Setup utility menu, move the cursor to Create
1.
RAID 5 for Reliability then press <Enter>.
2.
Use the up or down arrow keys to select a drive then press <Space> or
<Enter>. The striped mark "5" appears before a selected drive.
3.
Repeat step 2 to select the second and third drives.
4.
The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press <Y> to continue or press <N> to return to the menu.
5.
Key in a RAID name with a maximum of eight (8) alphanumeric characters
then press <Enter>. Do not use special characters or symbols.
6.
The utility displays the RAID Array settings at the bottom of the screen.
Channel 0 Master: XXXXXXXXXXX
Channel 1 Master: XXXXXXXXXXX
Channel 2 Master: XXXXXXXXXXX
Channel 3 Master: XXXXXXXXXXX
RAID Array A
RAID Array B
RAID Array C
2-48
Drive Model
Mode
SATA 2
SATA 2
SATA 2
Capacity
RAID Type
:
160 GB
:
:
Capacity
RAID Array/Type
XXXXX MB
RAID A/5
XXXXX MB
XXXXX MB
RAID A/5
XXXXX MB
RAID A/5
Stripe Size RAID Name
5
16K
Chapter 2: BIOS setup
RAID5
Hide quick links:
Advertisement
Table of Contents
